equipment and systems communications

ACCESORIES

33 articles

accesorie MT-200-B

32x32 Commutation Matrix

Model MT-200-B

The MT-200-B audio commutation matrix allows to commute 32 audio inputs to 32 outputs, completely controlled by a RS-232-C. The commutation is done by solid state circuits, not using mechanical elements to carry out the commutation (relays). It has the capacity of memorization of audio connections in 4 independent memory banks.

accesorie MT-212-A

Audio-I/O Commutation Matrix

Model MT-212-A

The MT-212-A Audio-I/O Commutation Matrix allows to commute audio and PTT in groups of 8 inputs / 8 outputs. Completely controlled by a RS-232-C. The commutation is done by solid state circuits. It has the capacity of memorization of audio connections in 4 independent memory banks.

accesorie CN-520-A

Antennas Switching

Model CN-520-A

The CN-520-A antenna switching is designed to direct different radiofrequency signals between different transmitters and its antenna. Applicable in INVELCO's Navtex system to operate with 1, 2 or 3 transmitters in transmissions of 3 frequencies.

accesorie CN-530-A

Antennas Switching

Model CN-530-A

The CN-530-A antenna switching is designed to direct different radiofrequency signals between different transmitters and its antenna. Applicable in INVELCO's Navtex system to operate with 1, 2 or 3 transmitters in transmissions of 1 or 2 frequencies.

accesorie CA-520-A/B

Antennas' Control and Switchboard

Model CA-520-A/B

Built in two different modules. Selectable local or remote operation. Remote operation through serial port.

accesorie AM-400-A

Audio Monitor

Model AM-400-A

This device has been designed for monitoring the MF/HF radio reception signals and is optimized for the hearing of signals with lots of noise.

accesorie PA-200-C

Audio Processor

Model PA-200-C

The audio Processor model PA-200-C has been designed as an interface between the radio systems in the remote stations and the operators in the control centre.

accesorie PA-400-D

Audio Processor

Model PA-400-D

The PA-400-D Audio Processor has been designed as Interface between the radio systems of remote stations and the operation from the control centre.

accesorie PA-400-E

Audio Processor

Model PA-400-E

Prepared for processing the transmitters and receivers audio up to a distance of 250 meters.

accesorie PA-650-IP

Audio Processor

Model PA-650-IP

VoIP console and Ethernet control for TR-650-IP Transceiver.

accesorie CA-450-A

Coaxial Relay Switch

Model CA-450-A

The coaxial switch of multiple relays mod. CA-450-A, is a device that allows SIMPLEX or DUPLEX operations of a VHF transmitter and a VHF receiver, with a diplexer of AS-7396 bands.

accesorie CA-600-A

Coaxial Switching

Model CA-600-A

The INVELCO equipment, model CA-600-A, is a device located in a coastal station and allows managing the connection of two transmitters to a single antenna.

accesorie BD-40

Discharge Coil

Model BD-40

40µH discharge coil for vertical antennas. Specially designed for the range of 1.6 to 30MHz.

accesorie AC-300-A

MF/HF Digital Receiver Accesories

Model AC-300-A

The accesories, distributed independently according to the chosen configuration, optimize the RX-500-A Digital Receiver efficiency.

accesorie CN-512-A

Navtex Antennas Switching

Model CN-512-A

The CN-512-A antenna switching is designed to direct different radiofrequency signals between different transmitters and its antenna. Applicable in INVELCO's Navtex System to operate with 1 or 2 transmitters in transmissions of 1 or 2 frequencies.

accesorie FA-424-A

Power Supply

Model FA-424-A

The FA-424-A Power Supply is ready to work with INVELCO transceivers of TR series. It allows the connection of the transceivers to 220Vac networks. The power supply has a 12Vcc permanent voltage output which switches on remotely producing voltages of 12Vcc and 28Vcc.

accesorie CT-350-A

RF Switch, Audio Line, PTT and RS-232

Model CT-350-A

The switch CT-350-A is designed to switch the audio lines, PTT and RF outputs between a principal VHF equipment and its reserve. It also switch the access through the RS-232 of the remote-controller.

accesorie BA-100-A

Rack 19"

Model BA-100-A

The rack of 19" constitutes a compact and solid group with a modern line for lodging a diversity of elements of 19" and meets the DIN-41.194, 1st part; and I.E.C. ,2nd edition international norms.

accesorie BA-800-F

Rack 19"

Model BA-180-F

The rack of 19" constitutes a compact and solid group with a modern line for lodging a diversity of elements of 19" and meets the DIN-41.194, 1st part; and I.E.C., 2nd edition international norms.

accesorie DR-160-A

RF Distributor

Model DR-160-A

Equipment designed as interface between antennas and transmitters and receivers equipment or transceivers equipment.

accesorie 8322

RF Load Attenuator

Model 8322

200W load attenuator used for the comprobation of RF in HF transmitters and transceivers equipments.

accesorie DR-160-A

RF Switch

Model CL-525-A/CA-525-A

Fabricated in two diffrent modules. Selectable local or remote operation. Remote operation through serial port.

accesorie CA-500-A/B

RF Switcher

Model CA-500-A/B

Fabricated in two different modules. Selectable local or remote operation. Remote operation through RS-232-C port.

accesorie CA-800-A

Rx Antennas Switch

Model CA-800-A

8 anntenas switching to 8 receivers for RF signals from 0 to 30MHz. This equipment allows to assign antenna (8 antennas), to one or several receivers simultaneously (8 receivers).

accesorie MP-650-A

RX-VHF Pre-Selector Multicoupler

Model MP-650-A

The RX-VHF Pre-Selector Multicoupler MP-650-A, allows the connection between one antenna and eight VHF receivers.

accesorie SC-500-A

Selcal/Audio Processor

Model SC-500-A

The SC-500-A equipment is in charge of managing all the signals to towards and from a receiver/transmitter for earth/air communications.

accesorie SC-600-A

Selcal Encoder

Model SC-600-A

The SC-600-A unit is an Earth/Air Selective Calling System.

accesorie SE-600-A

Selection Unit

Model SE-600-A

The SE-600-A Selection Unit has been designed for operating in a two transmitter system that must be used to fulfil three different funtions (telephone, DSC, data, etc.).

accesorie IT-200-A

Telephone Integrator

Model IT-200-A

The integrator model IT-200-A, 4 independent telephonic integrators included with a total control only throught RS-232-C bus.

accesorie AS-7396

VHF Band Pass Diplexer

Model AS-7396

Equipment assigned to allow the operation of a duplex transceiver with a single antenna. It's a passive device that isolates the reception transmission in more than 60dB, avoiding therefore the intermodulation between them.

accesorie FL-016-A

VHF Filter Channel 16

Model FL-016-A

Selective crystal filter for VHF channel 16. To place in the reception input and protect the equipment from transmission signals in adjacent channels.

accesorie FL-070-A

VHF Filter Channel 70

Model FL-070-A

Selective crystal filter for VHF channel 70. To place in the reception input and protect the equipment from transmission signals in adjacent channels.

accesorie AS-7746

VHF Tx Combiner

Model AS-7746

Equipment assigned to allow the operation of two VHF transmitters in different frequencies with a single antenna.